What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 07:25
a photo is worth a thousand words.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
For this case there are devices called Metal oxide varistors (MOV).
In schematic diagrams this is the symbol for a fuse:
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
What is a narcissist grandmother like, with her grandchild?
[image of Common-mode choke]
so, what happens?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Is it okay for my husband to help other ladies without telling me?
2024–10–10[John johnson John Johnson ]
The third is lightning and “how it gets conducted into a home.”
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
What is lightning?
A fuse is a non-resetable over current circuit protector.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
He then describes Rainy Season and Lightning.
Kubica Quickest in Opening Le Mans Test Session - Sportscar365
One
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This device then solves the entire problem.
Giant cable and satellite company closer to Chapter 11 bankruptcy - TheStreet
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
He then describes the function of a fuse.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
DC Mayor Bowser’s message for Shakira after WorldPride cancellation: ‘Get yourself here’ - WTOP
Here is a simplified AC power diagram.
[old diagram got deleted by accident]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
It seems Mohan does not understand the difference between a comment and an Answer.
He then asserts :
But… the neutral is now “floating” because of the 1 ohm resistance.
Tesla after Trump - Financial Times
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Because the load is inductive, the current lags the voltage.(by a bit).
So, the voltage could go up to 500 volts, and the fuse will not open up.
The bolt then partially travels down the line to your home.
It also is a device that limits the change in current flow.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
The other is “what does a “fuse” do?”
eight
At one ohm, the resistor has a maximum of 1 watt power.
With record crowd watching, Sky get blown out by Fever in first WNBA game at United Center - AP News
These are simplified answers to the original question, and does not change anything I wrote above.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is where the MOV conducts again, and dissipated the energy.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
The MOV will conduct when the voltage exceeds 50% of line voltage.
There are two important concepts here.
At least they know the answer if they wanted it.
This one hit behind the barn.
2024–10–16 [ OO OLAOYE OYEBODE ]
This is 'the assistant's answer'
A circuit breaker is similar, but is resettable.
but I think this circuit , shows a few more pieces.
An AC voltage/ current source, and an ac inductive load.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
(Dc diagram shown, AC is similar).
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
but this device (an Inductor) … impedes the rapid changes in the current.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Barnstars:
There are three different concepts here that are getting confused.
what exactly is a ‘surge’ protector?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Now when you have a certain ac resistance, then a current flows in a loop.
But it can get overloaded, and no longer works.
I post the exact comment here.
What does a fuse do?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
nine
These devices are installed between the “hot” and “neutral” and protective ground.
Edit 2024–10.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
One is “what exactly is in a ‘surge protector’ ? ”
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Upvotes:
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–14 [Omar Gharbi Omar Gharbi ]
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
First Sentence:
the problem then depends on "how fast does the fuse operate?".